FUJI CHEMICAL INDUSTRIAL CO.,LTD

ジョイントテープ

dl-bg

Catalog DownloadCatalog
Download

ジョイントテープアイコン

Easy Completion of Reel Replacement Work

This is a splicing tape for modular mounters that facilitate the mounting of electric components. By connecting the old and new reels with a splicing tape in advance, part shortages can be avoided. Production efficiency can be improved by eliminating labor and time loss due to reel replacements and machine stops. The product development and cost were reviewed, resulting in a more complete lineup.

PICK UP 01

Industry’s Best Retention Force

Since the connection point is retained with a high adhesive force, the top tape connection areas of the old and new carrier tapes will not come off during a long vacation at a factory or when restarting a mounter from its standby state.

PICK UP 02

Genuine Products for Major Domestic Manufacturers

Our products are trusted for high quality and performance and have been adopted by many companies including major domestic manufacturers.

PICK UP 03

Rich Lineup

We have recommended products of various mounter manufacturers and offer a rich lineup. You can choose according to the cost and application.

PICK UP 04

Confidence in Dimensional Accuracy

High quality is achieved with optimal design and dimension control for each carrier tape width. You can use this product with confidence without any trouble at the joint.

Specifications

A type that allows splicing without using a reinforcing metal plate depending on the mounter when connecting tapes is also included in the lineup, enabling easy and strong connection. In addition, the labor for separating garbage at the time of disposal can be reduced. There are no problems of peeling of the connection area or clogging of tape, which can contribute to the increased availability ratio of the mounter.
SPLICING TAPE FOR CONNECTING CARRIER TAPES

Support function of detecting splicing point

The black tape series supports the joint detection function of light transmission type sensors.

Full Range of Anti-static Products

The black tape series has an anti-static function and is effective for measures against electrostatic breakdown and sticking to the top tape.

Compatible with 8–72 mm

This product is compatible with 8 mm paper tape and embossed tape with a size of 8–72 mm.

Easy and Speedy Connection

With a built-in positioning jig function at the time of connection, anyone can perform connection quickly and accurately.

ST Tape

ST8A

ST8A

For 8mm wide paper, Emboss carrier tapes

ST8B

ST8B

For 8mm wide paper, Emboss carrier tapes

JT1272

JT1272

For 12~72mm wide Emboss carrier tapes

ST-Stype

ST-Stype

For 8mm wide paper, Emboss carrier tapes Combined use with metal plate

ST-Mtype

M-type

For 12mm・16mm wide Emboss carrier tapes Combined use with metal plate

ST-Ltype

ST-Ltype

For 24mm wide Emboss carrier tapes, 24mm and wider Combined use with metal plate

ST Tape

Function of detecting splicing point and ESD type

ST8QE

ST8QE

For 8mm wide paper, Emboss carrier tapes

ST8TS

FC8TS

For 8mm wide paper, Emboss carrier tapes

ST12QE

ST12QE

For 12mm wide Emboss carrier tapes

ST16QE

ST16QE

For 16mm wide Emboss carrier tapes

ST24QE

ST24QE
For Emboss carrier tapes, 24mm and wider

ST8BT

ST8BT

For 8mm wide paper, Emboss carrier tapes
For Emboss carrier tapes, 16mm and wider

ST12BT

ST12BT

For 12mm wide Emboss carrier tapes

ST01BT

ST01BT

for 12mm wide emboss carrier tapes and wider

ST-EPS

ST-EPS

For 8mm wide paper, Emboss carrier tapes
For Emboss carrier tapes, 16mm and wider
※"Pazzle Spliser" exclusive splicing tape

When it is difficult to select a product, please contact the sales staff.

Easy for anyone and No variation in work! Simple jig

Cutting tool for 8mm wide paper carrier tapes

Cutting tool
for 8mm wide paper carrier tapes

By placing the tapes holes on to the positioning pins, anyone can simply perform the same cutting consistenly and accurately. There is no need to worry about cutting off the work. By making the cut part a zigzag shape, the top tape can be easily peeled off and does not interfere with mounting.

crimping jig &Caulking Metal plate

crimping jig &
Caulking Metal plate

When you want strength, such as connecting wide embossed carrier tapes or single-sided tapes, or preventing misalignment at the joint, a plate is crimped using a crimping jig to connect the tapes.

Pazzle Spliser

Pazzle Spliser
Cutting tool for carrier tapes

By cutting the tips of 8 mm wide tape in a puzzle shape, it is possible to connect them without a metal plate. This jig can be used for positioning and trimming of old and new carrier tapes, and pasting of splicing tapes. Since the tip of the new tape is cut into a shape that is easy to peel off, there will be no problems where the top tape cannot be peeled off, and there is no problem in mounting. Stable splicing that does not depend on the skill of the operator can be realized.

パズルスプライザーイメージ

※Use of the dedicated splicing tape ST-EPS is assumed.
※Explanation movies are available at the bottom of this page.

HANDY JIG

HANDY JIG

This is a portable and palm-sized simple positioning jig. After cutting the carrier tapes with scissors, splicing without mistake can be performed by fixing them with the positioning pins of the Handy Jig. It is compatible with 8 mm embossed / paper carrier tape.

HANDY JIG イメージ

※Use of the dedicated splicing tape ST-EPS is assumed.

Other Tape Processing Products

Backing Up Efficiency of Mounting Process

We also offer various tape-processing products that support the mounting process with carrier tape.
They improve production efficiency from various aspects, such as simplification of work, prevention of problems, and reduction of loss.

SMT Sealing Tape

SMT Sealing Tape

Protective tape to prevent parts from falling off during storage
When removing a carrier tape from a mounter to store it, peeling of the top tape or falling off of parts can be prevented by covering the tip with this tape. Since the carrier tape can be reattached and mounted on the mounter with this tape attached, parts will not fall off while it is peeled off. This tape is compatible with all carrier tape widths. It is recommended when frequent process changes are required such as small lot multi-product mounting.

Chip tack tape

Chip tack tape

For reuse of inspection substrates and parts
This tape demonstrates the mounting of chip components.This tape adheres the PCBs to the test mounting, then it confirms whether components are adhered properly by mechanical inspection machine.This tape is reusable when the supply of PCBs and parts is not sufficient.You can reuse the PCBs and components after the demonstration because you can peel the tapes off without the adhesive compound sticking to them.The strength of the peel is stronger than the standard double-stick tape, as a result when peeled off the thin PCBs do not break.This is extremely effective while mounting numerous chip devices on large-sized PCBs.

Top Tape Removal Gun

Top Tape Removal Gun

Easy Removal of top tape with suction type
The top tape accumulated in a feeder is recovered by vacuum suction into an attached zipper bag. The troublesome Removal work can be completed in a few seconds. The top tape stored in the bag can be easily disposed of by opening and closing the zipper. In addition, if a branch line is connected to a compressor, no power supply is required, and the gun can be used immediately, and another advantage is that it can be easily introduced.
※Explanation movies are available at the bottom of this page

MOVIES

パズルスプライサー(ダブルカット)の紹介

Puzzle Splicer
(Double cut)

パズルスプライサー(シングルカット)の紹介

Puzzle Splicer
(Single cut )

トップテープ回収ガン

Top Tape Removal Gun

PRODUCT

UV Conformal Coating

Insulating Moistureproof Coating

Magazine Stick

Water Based Insulating Moisturproof Coating

Joint Tape

Thermosetting Epoxy Adhesives

PAGE TOP